Payments Secured Through PayPal


UV GUARD was developed for use as an exterior wood finish for log homes and quality wood siding. It is also very effective when used as a coating on fences, shingles and other vertical surfaces.
UV GUARD is also safe to use on interior wood surfaces and is especially good for areas that receive extra amounts of sunlight. Do not use on high density, high oil content or exotic woods.
Note: We do not recommend that clear UV GUARD be used as the only exterior coating. While UV GUARD will add longevity and protection to exterior wood surfaces, pigmented exterior finishes will provide even greater protection. In addition to the UV absorbers and stabilizers, the pigment particles themselves help to block the rays of the sun. Clear UV GUARD should only be applied as the “finish coat” after at least two (2) coats of a stain color have been applied, or as a “maintenance coat” to brighten and reseal a previous finish.
Stringent testing during which UV GUARD was subjected to high levels of sunlight, moisture and temperature extremes proved that UV GUARD lasted longer and provided greater protection than major competitors.
ADVANTAGES
Penetrates and Seals
The wood surface enriching the appearance of the natural wood and at the same time shielding and protecting the wood with a superior, longer lasting, weather-resistant finish..
Safe for Interior Use
UV Resistant
Odorless when dry
Low Flammability
In the liquid state and will also increase the kindling temperature/time of wood when dry.
Repels Moisture
While allowing the wood to breathe naturally.
Easily Applied
By brush, airless or pump style garden sprayer.
Provides Excellent Adhesive Surface
For chinking and virtually eliminates all debonding problems that are likely to occur.
| Copyright 2007© |
|---|